Study of the influence of sintering additives and vacuum sintering conditions on optical properties of LuAG:Er (1 at.%) ceramics

In this work, ceramic samples based on lutetium-aluminum garnet doped with erbium (content 1 at.%) were manufactured. In the manufacture of ceramic material, the chemical precipitation method was chosen. The influence of two types of sintering additives, MgO and CaO, on the microstructure and optica...

Celý popis

Uloženo v:

Podrobná bibliografie
Hlavní autoři:	Medyanik, E. V., Медяник, Е. В., Malyavin, F. F., Малявин, Ф. Ф., Lapin, V. A., Лапин, В. А., Kravtsov, A. A., Кравцов, А. А., Suprunchuk, V. E., Супрунчук, В. Е., Tarala, L. V., Тарала, Л. В.
Médium:	Статья
Jazyk:	Russian
Vydáno:	Tver State University 2025
Témata:	Lutetium-aluminum garnet doped with erbium Luminescence Light transmittance coefficient Sintering Optical ceramics
On-line přístup:	https://dspace.ncfu.ru/handle/123456789/29607
Tagy:	Přidat tag Žádné tagy, Buďte první, kdo otaguje tento záznam!

id	ir-123456789-29607
record_format	dspace
spelling	ir-123456789-296072025-02-04T08:17:13Z Study of the influence of sintering additives and vacuum sintering conditions on optical properties of LuAG:Er (1 at.%) ceramics Medyanik, E. V. Медяник, Е. В. Malyavin, F. F. Малявин, Ф. Ф. Lapin, V. A. Лапин, В. А. Kravtsov, A. A. Кравцов, А. А. Suprunchuk, V. E. Супрунчук, В. Е. Tarala, L. V. Тарала, Л. В. Lutetium-aluminum garnet doped with erbium Luminescence Light transmittance coefficient Sintering Optical ceramics In this work, ceramic samples based on lutetium-aluminum garnet doped with erbium (content 1 at.%) were manufactured. In the manufacture of ceramic material, the chemical precipitation method was chosen. The influence of two types of sintering additives, MgO and CaO, on the microstructure and optical properties of ceramic samples obtained at vacuum sintering temperatures of 1800, 1850, 1875°C was studied. The article discusses in detail how the microstructure and optical transmission of ceramics with sintering additives MgO and CaO change at different vacuum sintering temperatures. It was found that magnesium oxide allows to achieve a higher optical transparency of ceramics (about 80%), while calcium oxide more effectively inhibits the grain growth. An increase in the sintering temperature for samples with MgO from 1800 to 1850°C contributed to an increase in the light transmission of samples from 10 to 80% and an increase in grain size from 1,80 to 3,03 microns. Earlier no such a phenomenon was not observed for samples with CaO, samples obtained at sintering temperatures of 1850 and 1875°C had approximately the same microstructure, containing some residual microporosity. 2025-02-04T08:15:35Z 2025-02-04T08:15:35Z 2024 Статья Medyanik, E.V., Malyavin, F.F., Lapin, V.A., Kravtsov, A.A., Suprunchuk, V.E., Tarala, L.V. Study of the influence of sintering additives and vacuum sintering conditions on optical properties of LuAG:Er (1 at.%) ceramics // PHYSICAL AND CHEMICAL ASPECTS OF THE STUDY OF CLUSTERS NANOSTRUCTURES AND NANOMATERIALS. - 2024. - 16. - pp. 229-238. - DOI: 10.26456/pcascnn/2024.16.229 https://dspace.ncfu.ru/handle/123456789/29607 ru PHYSICAL AND CHEMICAL ASPECTS OF THE STUDY OF CLUSTERS NANOSTRUCTURES AND NANOMATERIALS application/pdf Tver State University
institution	СКФУ
collection	Репозиторий
language	Russian
topic	Lutetium-aluminum garnet doped with erbium Luminescence Light transmittance coefficient Sintering Optical ceramics
spellingShingle	Lutetium-aluminum garnet doped with erbium Luminescence Light transmittance coefficient Sintering Optical ceramics Medyanik, E. V. Медяник, Е. В. Malyavin, F. F. Малявин, Ф. Ф. Lapin, V. A. Лапин, В. А. Kravtsov, A. A. Кравцов, А. А. Suprunchuk, V. E. Супрунчук, В. Е. Tarala, L. V. Тарала, Л. В. Study of the influence of sintering additives and vacuum sintering conditions on optical properties of LuAG:Er (1 at.%) ceramics
description	In this work, ceramic samples based on lutetium-aluminum garnet doped with erbium (content 1 at.%) were manufactured. In the manufacture of ceramic material, the chemical precipitation method was chosen. The influence of two types of sintering additives, MgO and CaO, on the microstructure and optical properties of ceramic samples obtained at vacuum sintering temperatures of 1800, 1850, 1875°C was studied. The article discusses in detail how the microstructure and optical transmission of ceramics with sintering additives MgO and CaO change at different vacuum sintering temperatures. It was found that magnesium oxide allows to achieve a higher optical transparency of ceramics (about 80%), while calcium oxide more effectively inhibits the grain growth. An increase in the sintering temperature for samples with MgO from 1800 to 1850°C contributed to an increase in the light transmission of samples from 10 to 80% and an increase in grain size from 1,80 to 3,03 microns. Earlier no such a phenomenon was not observed for samples with CaO, samples obtained at sintering temperatures of 1850 and 1875°C had approximately the same microstructure, containing some residual microporosity.
format	Статья
author	Medyanik, E. V. Медяник, Е. В. Malyavin, F. F. Малявин, Ф. Ф. Lapin, V. A. Лапин, В. А. Kravtsov, A. A. Кравцов, А. А. Suprunchuk, V. E. Супрунчук, В. Е. Tarala, L. V. Тарала, Л. В.
author_facet	Medyanik, E. V. Медяник, Е. В. Malyavin, F. F. Малявин, Ф. Ф. Lapin, V. A. Лапин, В. А. Kravtsov, A. A. Кравцов, А. А. Suprunchuk, V. E. Супрунчук, В. Е. Tarala, L. V. Тарала, Л. В.
author_sort	Medyanik, E. V.
title	Study of the influence of sintering additives and vacuum sintering conditions on optical properties of LuAG:Er (1 at.%) ceramics
title_short	Study of the influence of sintering additives and vacuum sintering conditions on optical properties of LuAG:Er (1 at.%) ceramics
title_full	Study of the influence of sintering additives and vacuum sintering conditions on optical properties of LuAG:Er (1 at.%) ceramics
title_fullStr	Study of the influence of sintering additives and vacuum sintering conditions on optical properties of LuAG:Er (1 at.%) ceramics
title_full_unstemmed	Study of the influence of sintering additives and vacuum sintering conditions on optical properties of LuAG:Er (1 at.%) ceramics
title_sort	study of the influence of sintering additives and vacuum sintering conditions on optical properties of luag:er (1 at.%) ceramics
publisher	Tver State University
publishDate	2025
url	https://dspace.ncfu.ru/handle/123456789/29607
work_keys_str_mv	AT medyanikev studyoftheinfluenceofsinteringadditivesandvacuumsinteringconditionsonopticalpropertiesofluager1atceramics AT medânikev studyoftheinfluenceofsinteringadditivesandvacuumsinteringconditionsonopticalpropertiesofluager1atceramics AT malyavinff studyoftheinfluenceofsinteringadditivesandvacuumsinteringconditionsonopticalpropertiesofluager1atceramics AT malâvinff studyoftheinfluenceofsinteringadditivesandvacuumsinteringconditionsonopticalpropertiesofluager1atceramics AT lapinva studyoftheinfluenceofsinteringadditivesandvacuumsinteringconditionsonopticalpropertiesofluager1atceramics AT lapinva studyoftheinfluenceofsinteringadditivesandvacuumsinteringconditionsonopticalpropertiesofluager1atceramics AT kravtsovaa studyoftheinfluenceofsinteringadditivesandvacuumsinteringconditionsonopticalpropertiesofluager1atceramics AT kravcovaa studyoftheinfluenceofsinteringadditivesandvacuumsinteringconditionsonopticalpropertiesofluager1atceramics AT suprunchukve studyoftheinfluenceofsinteringadditivesandvacuumsinteringconditionsonopticalpropertiesofluager1atceramics AT suprunčukve studyoftheinfluenceofsinteringadditivesandvacuumsinteringconditionsonopticalpropertiesofluager1atceramics AT taralalv studyoftheinfluenceofsinteringadditivesandvacuumsinteringconditionsonopticalpropertiesofluager1atceramics AT taralalv studyoftheinfluenceofsinteringadditivesandvacuumsinteringconditionsonopticalpropertiesofluager1atceramics
_version_	1842245814020210688

Study of the influence of sintering additives and vacuum sintering conditions on optical properties of LuAG:Er (1 at.%) ceramics

Podobné jednotky