STRUCTURE AND COMPOSITION OF THIN GaAs1-x-yNxBiy FILMS PRODUCED BY PULSED LASER DEPOSITION

STRUCTURE AND COMPOSITION OF THIN GaAs1-x-yNxBiy FILMS PRODUCED BY PULSED LASER DEPOSITION

Uniaxial cold pressing was used to fabricate GaAs0,9Bi0,1 targets with 10% Bi content. Thin films of GaAs1-x-yNxBiy onto a GaAs (100) substrate were obtained from the formed GaAs0,9Bi0,1 target by pulsed laser deposition in an argon-nitrogen gas atmosphere, and their structure and composition were s...

Tallennettuna:

Bibliografiset tiedot
Päätekijät:	Devitsky, O. V., Девицкий, О. В.
Aineistotyyppi:	Статья
Kieli:	Russian
Julkaistu:	2023
Aiheet:	Diluted nitrides diluted bismuthides III-V-N-Bi GaAs1-x-yNxBiy Thin films Pulsed laser deposition
Linkit:	https://dspace.ncfu.ru/handle/20.500.12258/23459
Tagit:	Lisää tagi Ei tageja, Lisää ensimmäinen tagi!

Samankaltaisia teoksia

Effect of nitrogen pressure on the composition and structure of thin films GaAs1 - x - yNxBiy
Tekijä: Devitsky, O. V., et al.
Julkaistu: (2024)

Study of the composition of GaAs1-yBiy films obtained by pulsed laser deposition
Tekijä: Devitsky, O. V., et al.
Julkaistu: (2022)

EFFECT OF BISMUTH CONTENT ON THE STRUCTURAL AND ELECTRONIC PROPERTIES OF GaAs1-yBiy: FIRST PRINCIPLES CALCULATIONS
Tekijä: Devitsky, O. V., et al.
Julkaistu: (2024)

Peculiarities of pulsed laser deposition of thin InGaAsN films in an active background gas atmosphere
Tekijä: Devitsky, O. V., et al.
Julkaistu: (2023)

Extreme environment wideband, high-efficiency photovoltaics based on new physical principles and hyperfast LPE GaAs power electronics
Tekijä: Saytiev, A. B., et al.
Julkaistu: (2019)

Growth of nanotextured thin films of GaInAsP and GaInAsSbBi solid solutions on GaP substrates by pulsed laser deposition
Tekijä: Pashchenko, A. S., et al.
Julkaistu: (2023)

Pulsed laser deposition of gallium nitride thin films on sapphire substrates
Tekijä: Devitsky, O. V., et al.
Julkaistu: (2021)

Pulsed laser deposition of aluminum nitride thin films onto sapphire substrates
Tekijä: Devitsky, O. V., et al.
Julkaistu: (2020)

Influence of argon pressure on the surface morphology of thin InGaAsP/Si films
Tekijä: Devitsky, O. V., et al.
Julkaistu: (2022)

Epitaxial growth of GaInAsBi thin films on Si (001) substrate using pulsed laser deposition
Tekijä: Pashchenko, A. S., et al.
Julkaistu: (2024)

Structure and morphology of GaInAsP solid solutions on GaAs substrates grown by pulsed laser deposition
Tekijä: Pashchenko, A. S., et al.
Julkaistu: (2022)

Pulsed laser deposition of AlxGa1–xAs and GaP thin films onto Si substrates for photoelectric converters
Tekijä: Devitsky, O. V., et al.
Julkaistu: (2018)

Империи финансовых магнатов (транснациональные корпорации в экономике и политике империализма)
Tekijä: Иванов И. Д.

Компьютерный инженерный анализ в NX учебно-практическое пособие
Tekijä: Жигалкин, К. А.

Основы расчета изделия на прочность в приложении NX Расширенная симуляция учебное пособие
Tekijä: Ельцов, М. Ю.

Разработка управляющих программ для станков с ЧПУ. Система NX. Фрезерование учебное пособие
Tekijä: Поляков, А. Н.

Peculiarities of growing Ga1–xInxAs solid solutions on GaAs substrates in the field of a temperature gradient through a thin gas zone
Tekijä: Devitsky, O. V., et al.
Julkaistu: (2023)

Highly Efficient Lasing and Thermal Properties of Tm:Y2O3 and Tm:(Y,Sc)2O3 Ceramics
Tekijä: Vakalov, D. S., et al.
Julkaistu: (2023)

Применение средств бизнес-аналитики для управления компанией
Tekijä: Орлова, А. Ю., et al.
Julkaistu: (2023)

BI и BPM как способ создания ценности для бизнеса
Tekijä: Орлова, А. Ю., et al.
Julkaistu: (2021)

Задачи инженерного анализа процессов и аппаратов химической и биотехнологии в среде NX учебное пособие

LATERAL LOADED PILE DURABILITY IN CASE OF CHLORIDE CORROSION
Tekijä: Steshenko, D. M., et al.
Julkaistu: (2018)

Modeling stages of domino reaction of thiopyrano[4,3-b]indole-3(5H)-thiones and dimethyl acetylenedicarboxylate: a new synthetic route to γ-carbolines with thione group
Tekijä: Demidov, O. P., et al.
Julkaistu: (2024)

The effect of volumetric pulsed laser hardening of carbide cutting tools on the metal cutting efficiency
Tekijä: Pinakhin, I. A., et al.
Julkaistu: (2021)

Wear resistance increase of single-carbide hard alloys after bulk pulse-laser hardening
Tekijä: Pinakhin, I. A., et al.
Julkaistu: (2021)

Investigation into strength T5K10 hard alloy after volumetric pulsed laser hardening (VPLH)
Tekijä: Pinakhin, I. A., et al.
Julkaistu: (2020)

Lasers учебно-методическое пособие
Tekijä: Кудинова Т. В.
Julkaistu: (2022)

Основы СУБД Libreoffice Base и Bi-системы Yandex Datalens
Tekijä: Газуль, С. М.

About the Choice of Data Balance Method for Neural Network Classification of Electrocardiogram Signals
Tekijä: Kiladze, M. R., et al.
Julkaistu: (2024)

Peculiar properties of BK-8 hard alloy wear after volumetric laser pulsed hardening under production conditions
Tekijä: Pinakhin, I. A., et al.
Julkaistu: (2018)

Fabrication, microstructure and mid-infrared luminescence of Er:(ScxY1-x)2O3 transparent ceramics
Tekijä: Vakalov, D. S., et al.
Julkaistu: (2023)

Improving wear resistance of fast-cutting steel R6M5 after a volume pulse laser strength
Tekijä: Pinakhin, I. A., et al.
Julkaistu: (2019)

Numerical simulation of functional characteristics of solar elements ingaasn/si
Tekijä: Sanakulov, S. O., et al.
Julkaistu: (2021)

Investigation into physicomechanical properties of VK6, VK8, and T5K10 hard alloys after volumetric pulsed laser hardening
Tekijä: Pinakhin, I. A., et al.
Julkaistu: (2019)

The methodology for the formation of the regional food-producing clusters
Tekijä: Dotdueva, Z. S., et al.
Julkaistu: (2018)

Practica de lectura de textos espanoles (economia, politica, cultura y nuevas technologias) учебное пособие
Tekijä: Кузнецова, И. К.

Fabrication and optical properties of garnet ceramics based on Y3−xScxAl5O12 doped with ytterbium and erbium
Tekijä: Tarala, V. A., et al.
Julkaistu: (2023)

Professional English for Sound Engineers and Sound Producers учебное пособие
Tekijä: Максакова С. П.
Julkaistu: (2020)

Improvement of wear resistance of VK6, VK8, T5K10, and T15K6 hard alloys by volume pulsed laser hardening
Tekijä: Pinakhin, I. A., et al.
Julkaistu: (2018)

The introduction of technology for producing thin, multilayer, polyethylene heat shrink films with improved processing and service characteristics
Tekijä: Danilova-Volkovskaya, G. M., et al.
Julkaistu: (2019)